2.3 Non-government
Documents.
The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of the documents that are DoD
adopted are those listed in the issue of the DoDISS cited in the solicitation.
Unless otherwise specified, the issues of documents not listed in the DoDISS
are the issues of the documents cited in the solicitation (see
6.2).
National Conference of Standards Labs (NCSL) ANSI NCSL Z540-1 ISO 10012-1 2.4 Order of Precedence.
(Copies of the above documents are available from the Document Automation and
Production Service, Building 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094;
http://astimage.daps.dla.mil/online/new/.)
STANAG 2895
Extreme Climatic Conditions
and Derived Conditions for Use in Defining Design Test
Criteria for NATO Forces Materiel
STANAG 4242
Vibration
Tests for Munitions Carried in Tracked Vehicles
STANAG 4370
Environmental Testing,
31 May 1994
QSTAG 360
Climatic Environmental
Conditions Affecting the Design of Military Materiel
AECTP 100
Allied Environmental
Conditions and Test Publication (AECTP) 100, Environmental Guidelines for
Defence Materiel (under STANAG 4370)
AECTP 200
Allied Environmental
Conditions and Test Publication (AECTP) 200, Environmental Conditions (under
STANAG 4370)
AECTP 300
Allied Environmental
Conditions and Test Publication (AECTP) 300, Climatic Environmental Tests
(under STANAG 4370)
AECTP 400
Allied Environmental
Conditions and Test Publication (AECTP) 400, Mechanical Environmental Tests
(under STANAG 4370)
(Copies of the above documents are available from American National Standards
Institute (ANSI), 11 West 42nd Street, New York NY 10036-8002.)
AMERICAN NATIONAL
STANDARDS INSTITUTE (ANSI)
General Requirements
for Calibration
Laboratories and Measuring and Test Equipment
INTERNATIONAL
ORGANIZATION FOR STANDARDIZATION
(ISO) STANDARDS
Quality Assurance
Requirements for Measuring Equipment - Part I: Meteorological Confirmation
System for Measuring Equipment First Edition
In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. DEFINITIONS.
This terminology section is meant to define the general terminology as it is used in this standard. In certain cases the terminology use may be somewhat different from its use in the general engineering community. No attempt has been made to be complete, therefore limiting the glossary to such terms as are found in the standard and that are important to the application of the standard. Terminology unique to a particular method is defined, as appropriate, in that method.
NOTE: A continuation of this terminology section that contains terminology more closely related to the dynamic (mechanical) test methods such as vibration, shock, gunfire vibration, etc., is in Part One Appendix D.
